Ideal Security SK633 Скачать руководство пользователя страница 17

 

Page 17 of 17    5/11/2012 

 

1. AUTO-DIALER

 

WILL NOT ARM/DISARM 

a.

 

Make sure you have entered the correct password, if not, re-enter the password. 

b.

 

If it still does not work, perform the 

password reset

 following the instructions in the 

“CHANGE PASSWORD” section to reset the auto-dialer.

     

c.

 

Retry the ARM/DISARM function. 

   

2. UNIT WILL NOT DIAL 

a.

 

Make sure the telephone line is connected properly. 

b.

 

Make sure the telephone numbers are stored correctly. 

c.

 

Make sure the auto-dialer

 

is setup for auto-dial mode. 

d.

 

If auto-dialer does not receive a signal from the wireless sensor, perform the 

learn 

code

 function following the instruction in the 

“LEARN CODE FUNCTION FOR 

WIRELESS SENSORS” 

section. 

 

3. FALSE TRIGGER

 

  If the any sensor sends false signals, ensure that the batteries are still in good operating 
condition. Make sure that the gaps between the contact and sensor on the window and door 
contacts are no more than a ¼” apart and that arrows are pointing towards each other. 
 

TIPS 

1.

 

Make sure the full telephone number

 

has been entered correctly. 

2.

 

Only suitable for single phone line. Not compatible with fax machines or multi line 
telephones. 

 

WARNING 

All batteries including the back up battery in the telephone dialer should be changed once 
per year as the battery in smoke detector is changed. Should a power failure occur and the 
back up battery is weak, or batteries in all your sensors are weak, false alarms may occur. If 
the telephone dialer or any other detector is not being used for an extended period, remove 
the batteries to avoid any damage from battery leakage.   

 
NOTE

: Please preserve this manual. It contains valuable information for properly setting 

up and operating the system. Please check for updated instructions at 

www.idealalert.ca

 

 
 

Thank you for your purchase: If you have any questions about setup or 
function of this product, please call us at 800-361-2236 x230(514-363-1030) 
before returning to the point of purchase. Perhaps we can resolve your 
difficulty and eliminate future customer dissatisfaction. 

e-mail: 

[email protected]

 

       

www.idealalert.ca

 

 

Содержание SK633


















Отзывы: