Page 2 of 17 5/11/2012
Important note regarding Auto Dialer:
ANSWERING MACHINES and REMOTE COMMUNICATION
.
If you intend to use the
REMOTE ACTIVATION
features (controlling the alarm unit
remotely), you cannot use an answering machine.
To use the remote activation feature: Set the auto dialer to respond (pick up) before your
answering machine responds. For example, if your answering machine is set to pick up
after 5 rings then set the auto dialer to pick up after 3 rings, this way your AUTO DIALER
will pick up first, allowing you to enter your
key
selection.
Complete instructions on setting up the
remote activation follow.
If the answering machine is required, then the remote activation feature cannot be used. Set
the auto dialer to respond
after
your answering machine normally responds (set it to 10
rings) this will ensure that the answering machine is the first response.
IMPORTANT SAFETY TIPS
1. Do not install the system where it will be exposed to direct sunlight or rain.
2. The built-in siren is very loud, never put the system close to your ear.
3. The system should be installed away from heat sources such as radiators, heating ducts
and stoves.
4. If the system sounds at random, it is possible that the installed location is too close to a
heat source, changing the location or direction of the unit may correct the problem.
5. The system can provide valuable protection for your home and property if utilized
properly. However, this unit cannot guarantee complete protection against burglary or
property damage. Therefore, we will not be responsible for any losses or damages which
may occur, while using this product.
DESCRIPTION OF COMPONENTS
1. Antenna Jack
2. Telephone LINE Jack
3. Antenna
4. Battery Low LED
5. Ex Power LED
6. LCD Display
7. Numerical Keys
8. Buzzer (built-in siren)
9. DC 9V Jack
10. Home mode button
11. Battery Cover
12. External Trigger Input Terminal
