IDEAL INDUSTRIES UniPRO MGig1, Руководство пользователя

Страница: 33 / 68

UniPRO 152810
User Guide Page 33
Traffic generation
To set up traffic generation proceed as follows:
From the home screen select: SETUP (F4). Select
the TOOLS A icon to set up traffic on the primary
ports, or the TOOLS B icon to set up traffic on the
secondary ports. Select the TRAFFIC icon and the
‘Setup:Traffic’ screen (Fig 41) is shown on the
display.
For models with secondary ports traffic can be
generated on the B port while tests are run from the
A port.
Select a target from the dropdown list and set the
duration you wish to generate traffic for.
Targets are added, edited or deleted from
SETUP>TARGETS;
page 24
refers.
Fig 41
The addressing and protocol for each service is set at SETUP>SERVICES. The service settings available
from the Setup:Traffic screen (Fig 41) are related to how much bandwidth each service takes and the
information rate, frame size and fill. To adjust the settings for each of the eight services, select the
Service, 1 to 8, and the Limits screen for that service is shown on the display, Fig 42.
Info Rate: Enter a value in Mb/s. MGig1 will
calculate the maximum info rate per service based
on the info rate of other services, and the frame
size. You may enter less than the maximum.
When Services set up is complete, the percentage
bandwidth used is displayed at the bottom of the
‘Setup:Traffic’ screen under ‘ Used ’.
Free Info Rate and Bandwidth Rate
are
calculated and displayed for information only (Free
Info Rate is the maximum rate that you can allocate
to the particular service).
Bandwidth Utilization:
The bandwidth used by the
particular service, displayed as a percentage.
Fig 42
Frame Size: Choose from the dropdown list. A larger frame size means less frames and therefore less
overhead and more space for payload.
Pattern Data (Hex): Choose the pattern of data to fill the payload from the dropdown list.