Chapter 2
Test Setup Procedures
TIMEOUT OPTIONS
Set time-out options to help conserve battery power when the tester is not in use.
Default Timeout Settings:
Backlight 1
minute
Power 30
minutes
1.
Select Timeout Options on the Preferences screen. Press ENTER. The Timeout
Options screen appears with the cursor on the Backlight Timeout option.
Note: The timers begin counting from the last key press.
2.
Press the ARROW Keys to highlight the desired parameters.
3.
Select
or
to adjust the desired setting.
Figure 2-5: Timeout Options Screen
4.
Press ENTER to save or ESCAPE to exit.
MEASUREMENT UNITS
Use this option to set the unit of measurement parameter for length measurements.
The default setting is feet.
1.
Select Measurement Units on the Preferences screen. Press ENTER. The
Measurement Units screen appears.
2.
Select either
or
to set the unit of measure to feet or meters.
Figure 2-6: Measurement Units Screen
2-4
www.vemco.pl
Содержание FIBERTEK
Страница 1: ...w w w v e m c o p l ...
Страница 132: ...Chapter 7 LANTEK REPORTER Software 7 21 w w w v e m c o p l ...