IDEAL INDUSTRIES FIBERTEK, Руководство пользователя

Страница: 130 / 147

Chapter 7
LANTEK REPORTER Software
ADDING OR CHANGING THE TEST SET OPERATOR NAME
You may change the operator name for one or more tests. An operator name is
assigned to each Autotest.
1. Open a job and position the cursor in the desired test field on the right side of the
screen. Select one or several Autotest(s).
2. Select the Edit menu. Click Set Operator or click . The Set Operator dialog
box displays.
3. Click on the drop-down Menu for a list of all operators.
4. Select an operator from the drop-down list or enter a new operator name.
5. Click OK when you are finished.
FINDING A JOB OR TEST
The Find function searches for Job Names, Cable IDs, and Tests. You can control both
the type of match and the direction of the search.
1. Before opening the Find dialog box:
¾ Click on a folder at the Job level on the left side of the main database screen to
find a job.
¾ Click on a test in the test grid on the left side of the main database screen to
find a test.
2. Select the Edit menu. Click Find Job or Find Test or click on the toolbar. The
Find dialog box displays.
3. Enter the job name and then specify the Find criteria using the Match case and
Direction buttons.
4. Click Find Next to search for the next occurrence of the text.
5. Click Cancel when you are done searching.
NOTE: If the Test/Job is not found in the UP direction, use the DOWN direction and
repeat Steps 5 and 6.
7-19
www.vemco.pl