8
5) Press the red on button
[ON]
to power up the analyzer. This brings up the introductory screen of the
analyzer, where the user can select a program or load an additional program.
6) Use the up
[
5
]
and down
[
6
]
arrow buttons to move cursor through the available programs listed in
the introductory screen. The cursor will automatically skip over the spaces that are currently empty
and reserved for optional programs.
7) Select LOAD PROGAM and press enter
<ENTER>
.
8) Select one of the available spaces on the analyzer <EMPTY PROGRAM> and press enter
<ENTER>
.
9)
Selecting a space that is already occupied by a program will erase the program and replace it
with the new program being loaded by the user
.
10) The power analyzer will perform a diagnostic test to ensure that the cartridge has been properly
connected.
11) If analyzer detects the cartridge, then the program will be loaded.
12) Once the loading is completed, press the red off button
<OFF>
to turn the analyzer off.
13) When the unit is turned on again, the optional program will appear on the introductory screen.
14) If no program was found, or a loading error occurred, cycle the meter off and on again, and repeat
the steps above.
Note: If a cartridge has already been loaded on power analyzer, it will not load onto another. In this case,
the analyzer will display an error message on the screen.
3.3 Charging the battery
The 800 series power analyzers are equipped with an intelligent energy charging system. The analyzer
continuously checks the state of the battery while it is plugged into the power supply. The charging
process stops when the battery is at its maximum charge level. This increases the life of the batteries.
If the battery has been completely discharged, the charging process should last at least 3 hours with no
interruption. It is important to allow a new battery a charging period of 16 hours in order to completely
charge the battery.
The battery charge indication is located in the lower right-hand corner of the analyzer. The bars indicate
how much charge is left in the battery.
