Ideal Boilers Harrier GT, Установка, сборка и обслуживание

Страница: 11 / 40

INSTALLATION
Harrier GT Range
- Installation
11
7.1 DELUXE (OPTION) - CONTROL PANEL (continued)
• Fitting an SV-matic weather compensator
8219-EN-14
1 2
3
8219-EN-11 8219-EN-9
The SV-matic weather compensator is fitted in the front part
of the control panel. To do this:
- Remove the blank by cutting the surface with a stanley
knife (1) following the black line and by breaking the perfo
rations in the steel plate behind (2) with a pair of snips.
- Connect the two connections, situated behind the blank
(3), to the back of the SVR unit: blue connector to the blue
plug, red connector to the red plug.
- Locate the unit by its front and fix it using the two screws
sited in the front part of the equipment (l/4 turn clockwise).
Caution: when a two stage SV-matic weather compensator
type 322 DB is fitted, the resistor and the bridge respectively
fitted between terminals 34 and 37, and 34 and 35 must be
removed.