background image

U.S. Patent No. 8,856,780

01

ENGINE

START

STOP

OFF ACC

ON START

START

START

  

02

ENGINE

START

STOP

OFF ACC

ON START

OFF

  

03

  

04

  

05

  

06

  

07

  

08

ENGINE

START

STOP

OFF ACC

ON START

START

START

  

09

  

10

ENGINE

START

STOP

OFF ACC

ON START

OFF

  

11

  

12

  

13

  

14

RF

  

15

  

16

  

17

  

MODULE INSTALLATION PROCEDURE - 1 OF 1

START the vehicle. Verify all vehicle 

functionalities. If the vehicle displays error 

messages or any malfunction: stop the 

installation and service the vehicle.

Turn OFF the vehicle.

Verify all keyfob functionalities (Door Lock, 

Door Unlock, Trunk Release and RFID access 

if equipped).

Insert the expansion pack in the module.

Connect the module to the computer with the 

programming cable (WEBLINK port). Flash 

the module with the latest fi rmware then fl ash 

the expansion pack.

Connect and secure every connector to the 

vehicle, as shown in STEP 1 of the WIRING 

DIAGRAM.

WARNING: Any vehicle harness that is 

disconnected during installation, must be 

re-connected before performing any system 

tests. Failure to comply will result in vehicle 

displaying error messages. An OEM scantool 

will be required to clear the error messages.

START the vehicle. Verify all vehicle 

functionalities.

WARNING: If the vehicle displays error 

messages or any malfunction, stop the 

installation, verify every connection and if the 

problem persists, call technical support.

Turn OFF the vehicle.

Connect every connector to the module, as 

shown in STEP 2 of the WIRING DIAGRAM.

Connect every other connector to the module, 

as shown in STEP 3 of the WIRING DIAGRAM.

If the vehicle is not equipped with a factory 

hood switch, install an aftermarket hood 

switch as shown in STEP 4 of the WIRING 

DIAGRAM.

If required, connect a compatible RF Kit to the 

RF port of the module.

If required, connect a compatible Telematics 

Device to the TELEMATIC port of the module.

Put sticker 1 on a clean and visible surface 

in the engine bay and put sticker 2 under the 

dashboard near the OBDII connector.

Module installation procedure completed.

www.idatastart.com

Automotive Data Solutions Inc. © 2017

IDL-IDS(RS)-BZ1A-[ADS-BZ1]-EN

PAGE 7 OF 23

• 20170124

DOC.: #35777

Содержание ADS-BZ1
























Отзывы: