U.S. Patent No. 8,856,780
INSTALLATION CHECKLIST
- 1 OF 2
CHECKLIST
01
WARNING: Vehicle engine will start many times. Test in a well ventillated area.
02
Open driver door window for easy vehicle access.
03
Enter vehicle. Start the vehicle and let it run for 15 seconds.
04
Stop the vehicle and exit vehicle.
05
Close all vehicle doors, hood and trunk.
06
Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
QUESTION 1:
Does the vehicle remote start?
¨
¨
YES: Go to step 7.
NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat step 6 and call technical support if the problem persists.
07
Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.
QUESTION 2:
Does the vehicle shut down?
¨
¨
YES: Go to step 8.
NO: Repeat step 7. If the problem persists, unlock the door using the OEM keyfob, enter vehicle and press brake pedal to shut down the vehicle and call technical support.
08
Open hood.
QUESTION 3:
Is the orange warning sticker "Sticker 1" placed under the hood?
¨
¨
YES: Leave hood open and go to step 9.
NO: Put the mandatory orange warning sticker "Sticker 1", leave hood open and go to step 9.
09
Close all doors.
10
Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
QUESTION 4:
Does the vehicle remote start?
¨
¨
YES: Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle. Go to question 5.
NO: Go to step 11.
QUESTION 5:
Is the vehicle equipped with a factory hood switch? (Inside hood latch)
¨
¨
YES: The module does NOT detect the hood signal from the vehicle communication network. Call technical support.
NO: Install the mandatory hood switch included in the kit. Repeat installation checklist.
11
Close hood.
12
Enter vehicle. Do NOT press brake pedal.
13
Close all doors.
14
Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.
15
Wait for the vehicle to start.
16
Press brake pedal.
QUESTION 6:
Does the vehicle shut down?
¨
¨
YES: Go to step 17.
NO: The module does NOT detect the brake pedal signal from the vehicle communication network. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle and call technical
support.
www.idatastart.com
Automotive Data Solutions Inc. © 2017
IDL-IDS(RS)-BZ1A-[ADS-BZ1]-EN
PAGE 22 OF 23
• 20170124
DOC.: #35777
