F
SECTION
TYPE 1 - WIRING DIAGRAM
Page 55 of 71
DBI-TB-KO-EN
20131003
install guide
TraNSpONdEr BypaSS
KO
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2013
1N4001
DIODE
N/A
GWR (-) INPUT - BLUE/WHITE
GWR (-) INPUT - BLUE/WHITE
(NC) WHITE
(NC) WHITE
GROUND - BLACK
GROUND - BLACK
12V (+) - RED
12V (+) - RED
<- REQUIRED
<- REQUIRED
<- REQUIRED
12V (+)
12V (+)
GROUND (-)
GROUND (-)
GROUND WHEN RUNNING (-) OUTPUT
GROUND WHEN RUNNING (-) OUTPUT
WHITE/BLACK - RXCK KEY SIDE
WHITE/BLACK - RXCK KEY SIDE
WHITE/RED - RXCK VEHICLE SIDE
WHITE/RED - RXCK VEHICLE SIDE
WHITE (NC)
WHITE (NC)
REQUIRED: 1X DIODE
CODE
AMP
CODE ECM SIDE - PINK
CODE ECM SIDE - PINK
CODE KEY SIDE - PINK/BLACK
CODE KEY SIDE - PINK/BLACK
AMP - ORANGE
AMP - ORANGE
(NC) GRAY/YELLOW
(NC) GRAY/YELLOW
RXCK VEHICLE SIDE - GRAY/RED
RXCK VEHICLE SIDE - GRAY/RED
(NC) GREEN/YELLOW
(NC) GREEN/YELLOW
DATA - GREEN/RED
DATA - GREEN/RED
(NC) BLUE/YELLOW
(NC) BLUE/YELLOW
TXCT - BLUE/RED
TXCT - BLUE/RED
NOT REQUIRED IN DATA MODE (1-WAY)
NOT REQUIRED IN DATA MODE (2-WAY)
LEGEND
USE DATA MODE
OR HARDWIRE MODE
DATA MODE
DATA MODE
RX
CK
TX
CT
KEYSENSE (-)
CONNECTIONS MAY VARY
ACCORDING TO VEHICLE.
REFER TO CHART FOR CONNECTION
DETAILS TO IMMOBILIZER.
USE ISOLATED GROUND WHEN RUNNING
FROM REMOTE STARTER TO POWER KEYSENSE
REMOTE STARTER
Doc. No.: ##12410##