B
SECTION
TYPE 1 - WIRING DIAGRAM
Page 17 of 71
DBI-TB-KO-EN
20131003
install guide
TraNSpONdEr BypaSS
KO
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2013
N/A
<- REQUIRED
<- REQUIRED
<- REQUIRED
WHITE/BLACK - ALARM INPUT ECM
WHITE/BLACK - ALARM INPUT ECM
D CONNECTOR - FRONT VIEW
GWR (-) INPUT - BLUE/WHITE
GWR (-) INPUT - BLUE/WHITE
12V (+)
12V (+)
GROUND (-)
GROUND (-)
GROUND WHEN RUNNING (-) OUTPUT
GROUND WHEN RUNNING (-) OUTPUT
(NC) WHITE
(NC) WHITE
GROUND - BLACK
GROUND - BLACK
12V (+) - RED
12V (+) - RED
WHITE/RED - ALARM OUTPUT FUSE
WHITE/RED - ALARM OUTPUT FUSE
WHITE (NC)
WHITE (NC)
IGNITION (+) INPUT - PINK
IGNITION (+) INPUT - PINK
IGNITION OUTPUT - PINK/BLACK
IGNITION OUTPUT - PINK/BLACK
(NC) ORANGE
(NC) ORANGE
(NC) GRAY/YELLOW
(NC) GRAY/YELLOW
DATA - GRAY/RED
DATA - GRAY/RED
(NC) GREEN/YELLOW
(NC) GREEN/YELLOW
(NC) GREEN/RED
(NC) GREEN/RED
(NC) BLUE/YELLOW
(NC) BLUE/YELLOW
(NC) BLUE/RED
(NC) BLUE/RED
NOT REQUIRED IN DATA MODE (1-WAY)
NOT REQUIRED IN DATA MODE (2-WAY)
LEGEND
USE DATA MODE
OR HARDWIRE MODE
DATA MODE
DATA MODE
PINK
- OEM
ALARM
IGNITION
(BEHIND
CENTER
CONSOLE
)
OPTIONAL
IF THE IGNITION WIRE (LOCATED BEHIND
CENTER CONSOLE) IS INTERRUPTED BY
MODULE, THERE IS NO NEED TO OVERRIDE
THE VEHICLE FACTORY ALARM.
THIS INSTALLATION METHOD WILL ENSURE
YOUR FACTORY KEYFOB TO FUNCTION
NORMALLY AT ALL TIMES (INCLUDING
DURING REMOTE START).
BLACK/WHITE - DATA
PINK - IGNITION FROM ECM
REMOTE STARTER
Doc. No.: ##12410##