B
SECTION
XX-XX
PAGE X-X
ADS-AL(DL)-NI
PAGE X-X
MODULE PROGRAMMING PROCEDURE
1
Insert key into ignition.
2
Turn key to ON position.
ON
5
Module Programming
Procedure completed.
4
Turn key to OFF position.
OFF
3
Wait, LED will turn solid GREEN
for 2 seconds.
MODULE PROGRAMMING PROCEDURE WITH PUSH TO START SYSTEM
4
Module Programming
Procedure completed.
1
DO NOT PRESS BRAKE PEDAL
Push start button twice [2x] to
ON position.
x2
3
DO NOT PRESS BRAKE PEDAL
Push start button once [1x] to
OFF position.
x1
2
Wait, LED will turn solid GREEN
for 2 seconds.
ADS-AL(DL)-GM6
52 ADS-AL(DL)-HK
52 ADS-AL(DL)-MI2
52 ADS-AL(DL)-NI
52 ADS-AL(DL)-SUB
52 ADS-AL(DL)-VO
52 ADS-AL(DL)-VW
52
ADS-AL(TB)-GD
52 ADS-AL(TB)-HA
52 ADS-AL(TB)-HA
52 ADS-AL(TB)-HA1
52 ADS-AL(TB)-HA2
52 ADS-AL(TB)-HK
52 ADS-AL(TB)-MA
52
ADS-AL(TB)-NI
52 ADS-AL(TB)-PR
52 ADS-DL-CH
52 ADS-TB-GD
52 ADS-TB-HA
52 ADS-TB-HA
52 ADS-TB-HA1
52
ADS-TB-HA2 52 ADS-TB-HK
52 ADS-TB-MA
52 ADS-TB-NI
52 ADS-TB-PR
52 ADS-TBSL-C1
52
INSTALLATION MODE SELECTION
1
Press and release
programming button
to select installation mode.
2
Press and hold
programming button
until LED turns solid GREEN
to register selection.
!
After registration, follow Factory Reset Procedure to
change installation mode and restart this procedure.
LED fl ashes (1X) once = DATA MODE
LED fl ashes (2X) twice = STANDARD HARDWIRE MODE
Page 20 of 71
DBI-TB-KO-EN
20131003
install guide
TraNSpONdEr BypaSS
KO
guides Français disponibles au www.idatalink.com
www.idatalink.com/support
automotive data solutions inc. © 2013
Doc. No.: ##12410##