______________________________________________________________________
Co
Brite
User Manual
6
Never block the air fan and ventilation openings.
1.9.11
Cleaning the Instrument
To avoid personal injury, power down the device and disconnect it from line voltage before
performing any of the following procedures.
To clean the exterior surface, perform the following steps:
Remove loose dust on the outside of the instrument with a lint-free cloth.
Use a soft cloth dampened with water to clean the device. Use 75% isopropyl alcohol
solution as a cleaner. Do not use any abrasive or chemical cleaning agents.
1.9.12
Safety Symbols on Instruments
1.9.12.1
Warning or Caution
If you see this symbol on the product, you must refer to the manuals for specific Warning or
Caution information to avoid personal injury or damage to the product.
1.9.12.2
ESD Safety Warning
This sign indicates that the respective modules, boards or RF inputs and outputs are
susceptible to damage by electro static discharge (ESD), and require proper protection
procedures for storage and handling.
1.9.12.3
Output of Laser Radiation Warning
This sign does indicate a source of optical radiation that may emit close to the location this label
is present. Follow according laser safety procedures as listed below and defined in general rules
at all times.
1.9.12.4
Wear Eye Protection
Wear eye protection if exposure to high-intensity rays or laser radiation exists according to
Laser safety rules and best practices.
1.9.12.5
Do Not Directly View Optical Laser Port Output
Under no circumstances should you use any optical instruments to view the optical laser port
output directly.
