Secondary Reader Connections
Color
Wire
Connection
Red
Join to primary reader
red
wire ( 12VDC positive)
Black
Join to primary reader
black
wire ( 12VDC negative)
Yellow
Join to primary reader
yellow
wire (RS-485 A)
Violet
Join to primary reader
violet
wire (RS-485 B)
Shield
Join the shield (drain) wires together. Frame grounded at one point only
RS-485 Reader Location
As two RS-485 readers can be connected to the same RS-485 reader port, the reader
address
uniquely identifies
each reader, and determines which is the entry reader and which is the exit reader.
Configuration
Location
Reader address =
0
Entry
Reader address =
1
Exit
All readers are configured as an entry reader by default, unless programmed otherwise.
The address of TSL card readers can be programmed using a mobile device running the Protege Config App. The
Config App
Reader Configuration
will need a config with the
Reader Address
TLV selected, with the address set
as required for the reader's location.
For programming information, see the
ICT Card Reader Configuration Guide
, available from the ICT website.
The address and addressing options of TSL card readers is
not
determined by the reader's wiring configuration.
TSL Multi-Technology Card Reader | Installation Manual
24
