User Codes
User codes are personal identification numbers that allow you to enter certain programming modes, arm or disarm
your EliteSuite system, access the menu, and activate or deactivate home automation functions. The EliteSuite
system supports up to eight user codes.
The default master code to gain access to your system is
[1234]
. For security reasons, this code must be changed.
Refer to
for details on changing codes.
Master Code
By default, User 01 has the master code for your system. A user with the master code can perform the arm and
disarm functions, modify and delete any user code, change user options, and modify user card numbers.
Other users may be given a master code by enabling
User Option 2
for each new master user. For more
Duress Code
If you are forced to arm or disarm your system, entering the user code assigned to User 08 will arm or disarm the
system and immediately transmit a silent message (duress code) to the property management system or
monitoring station.
This option must be enabled by your property manager or security installation company.
Programming User Codes
Your EliteSuite system uses four-digit user codes, where each digit can be any value from 0 to 9. Avoid simple or
obvious user codes, such as part of your telephone number or address, and codes such as 1234, 1111 or 1212.
The master user can add, edit and delete user codes through the user setup menu.
Updating User Codes
1.
Press the
[MENU]
key, then enter your current user code.
2.
Use the up and down keys to scroll to the
User Setup
menu and press
[ENTER]
, or press
[5]
to access the
menu directly. The display will show:
Select user
To modify [01]
3.
Select the user whose code you wish to update. You can use the table at the end of this manual to record the
name of each user (see page 23).
4.
Scroll the menus to select the
Modify Code
option and press
[ENTER]
, or press
[1]
to access the option
directly.
5.
Enter the new four-digit code for the user and then press the
[ENTER]
key.
Select PIN
[****]
6.
When prompted, repeat the user code and press the
[ENTER]
key to confirm.
ELT-KLCS | EliteSuite Touch Sense LCD Keypad | User Manual
9
