manualshive.com logo in svg

ICS Auto Sentry flex, Руководство пользователя, Страница: 22 / 190

Поделиться
Скачать
ICS Auto Sentry flex Скачать руководство пользователя страница 22

Auto Sentry® 

flex

 User Manual

22

Introduction

Safe Configuration

You can use the optional safe with the 

ICS WashConnect 

cash management system.

NOTE:

If you are a new customer, you will need to make a choice about whether the safe is 
enabled or disabled for your site. ICS recommends using the safe. Discuss with your ICS 
service technician during your installation for more information.

The safe is a software-based repository of the reserve cash, coins, checks, token notes and token 
coins at your site, which are not currently in circulation at each attended and unattended terminal.

Enabling or Disabling the Safe

If you are a new ICS customer, then before you begin using your Auto Sentry® 

flex

 and cash 

management software, you will decide to enable or disable the safe. In either case, you can use 
cash management software to monitor the liquidity (cash on hand) at your site across devices.

If you enable the safe, you can monitor total liquidity.

If you disable the safe, you cannot monitor total liquidity for all devices. Some additional 
record keeping will be necessary.

Flex-Serve Facilities with the Safe

If you are a flex-serve facility, you can configure your Auto Sentry® 

flex

 to use the safe. This is 

shown on the left-half of the diagram below.

The safe can be disabled for the POS and Touch IT devices at your site. This is shown in the right-
half of the diagram below.

Содержание Auto Sentry flex































































































































































































Отзывы:

Нет отзывов