ICS Auto Passport, Руководство по установке

Страница: 7 / 14

Auto Passport Installation Guide Page 6
Copyright © Innovative Control Systems, Inc.
Truss and RFID System Installation
NOTE:
It is recommended to have 2 people perform the installation of the RFID system.
Tools Required (not supplied by ICS)
„
1/8” Allen Wrench
„
Small Flat Head Screw Driver
„ Hammer Drill
„ Diagonal Cutting Pliers
„
Fish Tape
„
Ladder
Parts Required (not supplied by ICS)
„
8” or greater UV Cable Ties
„
1/2” dia. x 6” L Concrete Anchor Bolts
Parts Required (supplied by ICS)
Part Description Parts Included
All-In-One RFID Reader / Antenna Enclosure
NOTE: Colors may vary.
Power and Data Wires
in the RFID All-In-One Cable
Estimated Completion Time
We estimate that it will take 2 hours to perform this procedure. Keep all hardware organized as you work.
WARIGE: Please have a certified electrician check voltages on the power supply before installing new
components. Ohe voltage should be 24 volts.