26
E28IB004EN-G
3. Lead the filling tube into a suitable waste vessel.
4. Fill the syringe with the sample.
5. Connect the syringe to the syringe adapter and fill the measuring cell
(see fig. 8).
Fig. 8: Filling sample with a syringe
10.2 Performing a Measurement
1. Set the proper measuring units (see section 8).
2. Fill the sample (see section 10.1.1 for filling with the filling tube or
section 10.1.2 for filling with a syringe).
The instrument shows continuous live readings of measuring values.
3. Start the measurement:
- Activate
(“Start” function) in the quick access area,
- or use the corresponding gesture (see section 6.6) if gesture control
is enabled.
You may abort a measurement by tapping <Cancel> or with the
corresponding gesture if gesture control is enabled.
4. When the measurement is finished (indicated in the status bar), the
measuring result will “freeze” on the display.
Tap <Live> to “unfreeze” the measuring result and return to showing
continuous live readings.
Содержание Snap 41
Страница 1: ......
Страница 38: ...E28IB004EN G 37 Appendix B Declarations of Conformity...
Страница 39: ...38 E28IB004EN G...