ICS Schneider Messtechnik Snap 41, Инструкция по эксплуатации и информация о безопасности

Страница: 7 / 40

6 E28IB004EN-G
• Ensure that all operators have been trained beforehand to use the
instrument safely and correctly.
• Ensure that the instrument is sufficiently supervised during operation.
• In case of damage or malfunction, do not continue operating the instru-
ment. Do not operate the instrument under conditions which could result
in damage to goods or injuries or loss of life.
• Do not expose the instrument to temperatures below 0 °C (32 °F) when
the measuring cell contains water. Freezing water will cause rupture of
the measuring cell.
• The instrument is not insulated against high voltages. Measuring samples
under high voltage (e.g. in energized battery banks) bears the risk of an
electric shock. Define appropriate testing procedures and safety mea-
sures to protect yourself from any electric shock.
Operation in areas with risk of explosion
• The instrument is not explosion-proof and therefore must not be
operated in areas with risk of explosion.
General precautions
• Observe and adhere to your national safety regulations regarding the
handling of all substances associated with your measurements (e.g. use
safety goggles, gloves, respiratory protection, etc.).
• Before a measurement check the wetted parts of the instrument for
chemical resistance to the samples and cleaning agents used.
Precautions for flammable samples and cleaning agents
• Keep potential sources of ignition, like sparks or open flames, at a safe
distance from the instrument.
• Store only the minimum required amount of sample, cleaning agents,
and other flammable materials near the instrument.
• Do not spill sample/cleaning agents or leave their containers uncovered.
Immediately remove spilled sample/cleaning agents.
• Ensure that the setup location is sufficiently ventilated. The environment
of the instrument must be kept free from flammable gases and vapors.
• Provide fire-extinguishing equipment.