E28IB004EN-G
19
6.6 Operation by Gestures
You can start or abort a measurement by gestures instead of key operation.
To be able to do so, enable gesture control in the setup menu (see
section 7.4).
To start a measurement
• Turn the instrument to the right as shown in fig. 5, and hold the position
until the measurement starts.
Fig. 5: Instrument turned to the right
To abort a measurement
1. Turn the instrument to the left as shown in fig. 6, and hold the position
until a confirmation message appears.
Fig. 6: Instrument turned to the left
2. Confirm:
- To confirm canceling, turn the instrument to the left again as shown in
fig. 6, and hold the position until the measurement has stopped.
- To continue with the measurement, turn the instrument to the right as
Содержание Snap 41
Страница 1: ......
Страница 38: ...E28IB004EN G 37 Appendix B Declarations of Conformity...
Страница 39: ...38 E28IB004EN G...