ICS Schneider Messtechnik IPT-2x, Инструкция по эксплуатации

Страница: 29 / 80

29
6 Set up with the display and adjustment module
WIKA Operating Instructions - Process pressure transmitter IPT-2x
6.2 Measured value indication
With the [->]
key you can move between three different indication
modes.
In the first view, the selected measured value is displayed in large
digits.
In the second view, the selected measured value and a correspond-
ing bargraph presentation are displayed.
In the third view, the selected measured value as well as a second
selectable value, e.g. the temperature, are displayed.
With the " OK " key you move (during the initial setup of the instrument)
to the selection menu " Language ".
In this menu item, you can select the national language for further
parameterization.
With the " [->] " button, you can select the requested language, with
" OK
" you confirm the selection and move to the main menu.
You can change your selection afterwards with the menu item " Setup
- Display, Menu language
".
6.3 Parameter adjustment - Quick setup
To quickly and easily adapt the sensor to the application, select
the menu item "
Quick setup " in the start graphic on the display and
adjustment module.
Select the individual steps with the [->] key.
After the last step, " Quick setup terminated successfully " is displayed
briefly.
The return to the measured value indication is carried out through the
[->] or [ESC] keys or automatically after 3 s
Note:
You can find a description of the individual steps in the quick setup
guide of the sensor.
You can find "
Extended adjustment " in the next sub-chapter.
Measured value indica-
tion
Selection language