ICS Schneider Messtechnik IPT-2x, Инструкция по эксплуатации

Страница: 11 / 80

11
3 Product description
WIKA Operating Instructions - Process pressure transmitter IPT-2x
The process fitting is sealed against the process by a suitable seal. It
must be provided by the customer, depending on the process fitting
also included in the scope of delivery, see chapter " Technical data ",
"
Materials and weights
".
3.3 Supplementary cleaning procedures
The IPT-2x is also available in the version " Oil, grease and silicone-
free ". These instruments have passed through a special cleaning
procedure to remove oil, grease and paint-wetting impairment sub-
stances (PWIS).
The cleaning is carried out on all wetted parts as well as on surfaces
accessible from outside. To keep the purity level, the instruments are
immediately packed in plastic foil after the cleaning process. The
purity level remains as long as the instrument is kept in the closed
original packaging.
Caution:
The IPT-2x in this version may not be used in oxygen applications.
For this purpose, instruments are available in the special version "
Oil,
grease and silicone-free for oxygen applications ".
3.4 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging consists of environment-friendly, recyclable card-
board. For special versions, PE foam or PE foil is also used. Dispose
of the packaging material via specialised recycling companies.
Transport must be carried out in due consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter " Supplement -
Technical data - Ambient conditions "
•
Relative humidity 20 … 85 %
Packaging
Transport
Transport inspection
Storage
Storage and transport
temperature