6. Reset to factory settings
31
Menu level
Parameterisation level
Totaliser reset,
tot.re:
Default:
00000
The reset value is adjusted from the smallest to the highest digit with the navigation keys
[
▲
] [
▼
]
and digit per digit confirmed with
[P]
. After the last digit, the display switches back to
the menu level. The activator for the reset is parameter driven via the 4th key or via the optional
digital input.
Back to menu group level,
rEt
:
With
[P]
the selection is confirmed and the device changes into menu group level
„–tot–“
.
Menu group level
Programming lock,
run
:
Description see page 12, menu level
run
To return the unit to a
defined basic state
, a reset can be carried out to the default values.
The following procedure should be used:
• Switch off the power supply
• Press
[P]
button
• Switch on voltage supply and press
[P]-
button until
„- - - - -“
is shown in the display.
With reset, the default values of the program table are loaded and used for subsequent operation.
This sets the unit back to the state in which it was supplied.
Caution! All application-related data are lost.
6. Reset to factory settings
