ICS Advent 586MBHP Series, Руководство по эксплуатации продукта

Страница: 43 / 72

Chapter 2: WinBIOS Setup
Manual Number: 41209-003-2 Page 2-13
If You Do Not Want to Use a Password
Just press <Enter> when the password prompt appears.
Setting a Password
The password check option is enabled in Advanced Setup by choosing either Always (the
password prompt appears every time the system is powered on) or Setup (the password prompt
appears only when WINBIOS is run). The password is stored in CMOS RAM. The following
screen appears when you select the password icon from the WINBIOS Setup main menu. You
can enter a password by : Typing the password on the keyboard or Selecting each letter via the
mouse. When you select Supervisor or User, AMIBIOS prompts for a password. You must set
the Supervisor password before you can set the User password. Enter a 1-6 character password.
The password does not appear on the screen when typed. Make sure you write it down. If you
forget it, you must drain CMOSRAM and reconfigure the system.
Changing a Password
Select the appropriate password icon (Supervisor or User) from the Security section of the
WINBIOS Setup main menu. Enter the password and press <Enter>. The screen does not display
the characters entered. After the new password is entered, retype the new password as prompted
and press <Enter>. If the password confirmation is incorrect, an error message appears. If the
new password is entered without error, press<Esc> to return to the WINBIOS completes. The
next time the system boots, you are prompted for the password if the password function is present
and is enabled.
Remember the Password
Keep a record of the new password when the password is changed. If you forget the password,
you need to reset the CMOS memory (refer to JP 9 on jumper settings - chapter 1)
Anti-Virus
When this icon is selected from the Security section of the WINBIOS Setup main menu,
AMIBIOS issues a warning when any program (or virus) issues a Disk Format command or
attempts to write to the boot sector of the hard disk drive. The settings are Enabled or Disabled.
If enabled, the following appears when a write is attempted to the boot sector. You may have
to type N several times to prevent the boot sector write.
Boot Sector Write!!!
Possible VIRUS: Continue (Y/N)?_
The following appears after any attempt to format any cylinder, head, or sector of any hard disk
drive via the BIOSINT 13 Hard Disk Drive Service:
Format!!!
Possible VIRUS: Continue (Y/N)?_