ICRealtime MAX5XXD Series, Руководство пользователя

Страница: 57 / 195

47
Please follow the procedures below to go on cable connection

Connect the dome RS485 port to DVR 485 port.

Connect dome video output cable to DVR video input port.

Connect power adapter to the dome.
4.8. 2 PTZ Setup
Note: The camera video should be in the current screen. Before setup, please check the
following connections are right:

PTZ and decoder connection is right. Decoder address setup is right.

Decoder A (B) line connects with DVR A (B) line.
Boot up the DVR, input user name and password.
In the main menu, click setting, and then click Pan/Tilt Control button. The interface is shown
as in Figure 4-41. Here you can set the following items:

Channel: select the current camera channel.

Protocol: select corresponding PTZ protocol(such as PELCOD)

Address: default address is 1.

Baud rate: select corresponding baud rate. Default value is 9600.

Data bits: select corresponding data bits. Default value is 8.

Stop bits: select corresponding stop bits. Default value is 1.

Parity: there are three options: odd/even/none. Default setup is none.
Figure 4-41
After completing all the setting please click save button. R
ight click mouse (click “Fn” Button
in the front panel or click “Fn” key in the remote control). The interface is shown as in Figure
4-42.