ICRealtime ICIP2040IR, Руководство по установке

Страница: 14 / 22

7
4 WALL MOUNT BRACKET INSTALLATION
4.1 Component Installation
Wall mount bracket is shown as below. See Figure 4-1.
Figure 4-1
4.2 Installation
4.2.1 Installation Requirements
The wall mount speed dome can be installed in the hard construction wall in the indoor
environments. Before the installation, please make sure:

The wall is thick enough to install the expansion bolt.

The wall can at least sustain the 8x weight of the speed dome.
4.2.2 Installation Steps
1).Please draw holes position in the wall according to the holes of the bottom of wall mount base.
Then you can dig holes and insert the expansion bolts. Use four hex bolts and flat washer to fix
the wall mount base in the expansion bolts. See Figure 4-2.