ICRealtime ICIP2040IR, Руководство по установке

Страница: 11 / 22

4
Figure 2-4
120Ω terminal resistance is available on the power panel, different dial switch modes are
consistent with corresponding terminal resistance access status, please see sheet 3-1 for more
information.
1 2 Terminal Resistance
Access Status
OFF OFF OFF
ON OFF ON
OFF ON ON
ON ON ON
Sheet 3-1
2.5 TF Card Slot and Reset Button
TF card slot and RESET button is shown as in Figure 2-5.
Press the RESET button for at least five seconds; you can restore factory default setup.
Press the WPS button on the speed dome and the router at the same time. The speed dome can
automatically connect to the network.
Before you remove the SD card, please make sure it is not in read/write status; otherwise
you may lose data or result in SD card damage.
Figure 2-5