manualshive.com logo in svg

ICP RS Series, Руководство пользователя, Страница: 46 / 193

Поделиться
Скачать
ICP RS Series Скачать руководство пользователя страница 46

46

On hard disks, CD-ROMs, tape streamers, etc., the SCSI ID is normally set through jumpers
or small DIP switches. The ICP Controllers offer a far more comfortable method: software
switches in the ICP RAID Console or ICP RAID Navigator programs allow you to easily set
the SCSI ID of an ICP SCSI channel. It is recommended to leave the default ID value at 7
(allowed values 0, 1, 2, 3, 4, 5, 6 and 7). Some operating systems require that the SCSI ID of
certain SCSI device (e.g., tape streamer, CD-ROM) is set to a particular value (for more in-
formation, please refer to the appropriate chapter in this manual).

B.4.4  ICP SCSI Accessories

Order # Part Name

Description

Application

8839

Wide/Ultra2
and Ultra160
Flat Ribbon
Cable

150 cm Wide/Ultra2 and Ultra160 SCSI
cable with seven 68 pin HD SCSI connec-
tors (male).

Connection of up to 5 internal
Wide/Ultra SCSI devices per SCSI
channel and one SE/LVD termi-
nator (Order No.: 8951).
For LVDS operation.

8844

Wide/Ultra2
and Ultra160
Round Cable

3 meters Wide/Ultra2 and Ultra160 Round
Cable with stackable 68 pin VHD SCSI
connector (male) and 68 pin HD SCSI
connector (male). Both with thumb screws.

Connection of an external
Wide/Ultra2 and Ultra160 SCSI
subsystem.
For LVDS operation.

8877

Wide/Ultra2
and Ultra160
Round Cable

1 meter Wide/Ultra2 and Ultra160 Round
Cable with stackable 68 pin VHD SCSI
connector (male) and 68 pin HD SCSI
connector (male). Both with thumb screws.

Connection of an external
Wide/Ultra2 and Ultra160 SCSI
subsystem. For LVDS operation.

8845

Wide/Ultra2
and Ultra160
SCSI Bracket

Bracket with two internal 68 pin HD SCSI
connector (female) and two external 68 pin
VHD SCSI connectors (female).

Connection of external
Wide/Ultra2 and Ultra160 SCSI
subsystems. For LVDS operation.

8849

Wide/Ultra2
and Ultra160
SCSI Bracket

Bracket with one internal 68 pin HD SCSI
connector (female) and one external 68
pin VHD SCSI connector (female).

Connection of an external
Wide/Ultra2 and Ultra160 SCSI
subsystem. For LVDS operation.

8850

Wide/Ultra2
and Ultra160
SCSI Bracket

Bracket with one internal 68 pin HD SCSI
connector (female) and one external 68
pin HD SCSI connector (female).

Connection of an external
Wide/Ultra2 and Ultra160 SCSI
subsystem. For LVDS operation.

8880

Wide/Ultra2
and Ultra160
Round Cable

1 meter Wide/Ultra2 and Ultra160 Round
Cable with 68 pin HD SCSI connectors
(male).

Connection of an external
Wide/Ultra2 and Ultra160 SCSI
subsystem. For LVDS operation.

8951

LVDS/SE Ter-
minator

Terminator for LVDS or SE buses with 68
pin HD SCSI connector (female). LEDs
indicate, whether the bus/terminator is
operating in SE or LVDS mode.

Termination of SE or LVDS 68 pin
cables.
For LVDS operation.

8952

LVDS/SE Ter-
minator for
SE/LVDS Hard
Disks with SCA
Connector.

Terminator for LVDS or SE buses with SCA
connector for the hard disk and 68 pin HD
SCSI connector (female). Connector for
DC. Jumpers for SCSI-ID, Termination,
Termpower, etc.

This product converts Wide/Ultra2
and Ultra160 or Wide/Ultra hard
disks with SCA connector into
"normal" hard disks with termina-
tion (SE and LVDS), DC connec-
tor, Jumpers for SCSI-ID, etc..
For LVDS operation.

8953

External
LVDS/SE Ter-
minator

Stackable external Terminator for SE or
LVD busses with 68 pin VHD SCSI con-
nector (male). Thumb-Screws.

For LVDS operation.

8954

SCSI Wonder

Wide/Ultra2 SCSI Ex-
pander/Repeater/Isolator

Max. 80MB/sec Data Transfer
Rate. For Clustering Systems.

Содержание RS Series


































































































































































































Отзывы:

Нет отзывов