ICP RS Series Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 193

ICP RS Series Скачать руководство пользователя страница 20

20

A.2 Copyrights, Patents

Parts of the ICP GDT RS, RN and RZ Series controllers are protected under international
copyright laws and agreements. No part of the product or the manual, or parts of the man-
ual may be reproduced in any form, physical, electronic, photographic, or otherwise, with-
out the expressed written consent of ICP vortex Computersysteme GmbH. For this product
a patent is registered at the Deutsches Patentamt in Munich with the official reference no.
4121974.
All special names and trademarks of manufacturers quoted in this manual are protected by
copyright.

ICP - Intelligent Computer Peripherals ®

and

RAIDYNE ®

, are registered trademarks of

ICP vortex Computersysteme GmbH.

Europe:

ICP vortex Computersysteme GmbH

P

Konrad-Zuse-Str. 9

P

74172 Neckarsulm -

Germany

P

Tel.: +49-(0)-7132-9620-0

P

Fax: +49-(0)-7132-9620-200

P

E-Mail: sup-

[email protected]

P

WWW: http://www.icp-vortex.com

United States of America:

Phone: 480-552-1422

P

Fax: 480-552-0557

P

E-Mail: [email protected]

P

WWW: http://www.icp-vortex.com

ICP vortex is member of the following initiatives and organizations:

«
...
18
19
20
21
22
...
»

Содержание RS Series


































































































































































































Отзывы:

Нет отзывов