ICP RS Series Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 193

ICP RS Series Скачать руководство пользователя страница 19

19

ROM-resident character-based configuration and monitoring utility

ICP RAID Console

.

Express Setup option to easily setup Array Drives. Press "CTRL-G" to load ICPCON, long
before the operating system is booted. ICPCON is also available as an executable pro-
gram under the various supported operating systems.

ICP RAID Navigator

. GUI-style configuration and monitoring utility for Windows

95/98/NT/2000.
ICPCON. Character oriented program for Windows 95/98/NT/2000, NetWare, Linux, SCO
UNIX, UnixWare, FreeBSD. Both tools allow the configuration and monitoring of ICP
Controllers with their array drives.
Remote operation. Intelligent messaging.

On-Board i960Rx © Intelligent 64 Bit I/O Processor. Completely offloads the host CPU.

Up to six Ultra160 SCSI channels with onboard multimode (LVD/SE) termination. Up to
160MB/s per Ultra160 SCSI channel.

Up to 12 meters cable length per Ultra160 SCSI channel.

Flexible Cache RAM. Automatic Cache RAM detection.
RS Series Controllers: PC133, ECC/Non-ECC, unbuffered DIMM: 32, 64, 128MB
RZ Series 32 Bit Controllers: PC133, ECC, unbuffered SO-DIMM: 32, 64, 128, 256MB
RZ Series 64 Bit Controllers: PC133, ECC, unbuffered DIMM: 32, 64, 128, 256MB
Optional “Magic DIMM” for RS Series and 64-Bit RZ Series Controllers. Magic DIMM is a
removable and intelligent DIMM with battery backup: 64MB ECC.

Intelligent multi-level cache-algorithm with adaptive delayed write and read ahead func-
tions. This ensures an optimized cache for various load profiles and system require-
ments.

On-Board PCI 2.2 compatible BIOS (Plug & Play).

BIOS, Firmware and ICPCON in Flash-RAM. Easy update.

Drivers for MS-DOS, Novell NetWare, SCO UNIX V/386, UnixWare, Linux, FreeBSD, Win-
dows NT, Windows 95/98 and Windows 2000. ASPI-Managers for DOS, Windows and
Novell NetWare. I

2

0 ready controller design.

Controllers equipped with Cluster RAIDYNE® Firmware (GDT86x3RZ) include support
for Microsoft® Cluster Server® (MSCS) and the Orion® Server from Novell. There is also
support for Linux Clustering solutions.

«
...
17
18
19
20
21
...
»

Содержание RS Series


































































































































































































Отзывы:

Нет отзывов