31
PCI Latency Timer (PCI Clocks) >
to define the latency timing
(PCI clock) for all PCI devices on the PCI bus.
PCI VGA Palette Snoop >
this option is useful only for system
with more than one VGA devices connected to it through
different bus (one PCI and one ISA). To enable those various
VGA devices to handle signal from the CPU on each set of
palette registers of every video devices, it must be set
Enabled
.
Allocate IRQ to PCI VGA >
to allocate IRQ to PCI VGA, answer
Yes and vice versa.
Offboard PCI IDE Card >
to specify if an offboard PCI IDE card
is installed in your computer or not. You must specify the slot
number on the board which will be used for the card.
Offboard PCI IDE Primary (/Secondary) IRQ >
to specify the
PCI interrupt that is assigned to the Primary (/Secondary) IDE
channel on the offboard PCI IDE controller.
PCI Slot (1,2,3,4) IRQ Priority >
to specify the IRQ priority to
be used by the PCI devices on slot 1 to 4.
DMA Channel (0,1,3,5,6,7) >
to indicate whether or not the
DMA channel is assigned for a PnP or ISA card.
IRQ (3,4,5,7,9,10,11,14,15) >
to assign the displayed IRQ to be
used by a legacy ISA adapter card. The settings are ISA/EISA or
PCI/PnP.
