35
4.10 Auto-Detect Hard Disks
This option detects the parameters of an IDE hard disk drive
(HDD sector, cylinder, head, etc) automatically and will put the
parameters into the Standard CMOS Setup screen. Up to 4 IDE
drives can be detected and the parameters will be listed in the
box. Press <Y> if you accept these parameters. Press <N> to skip
the next IDE drives.
Note: If your IDE HDD was formatted in previous older system,
incorrect parameters may be detected. In this case, you need to enter
the correct parameters manually or low-level format the disk.
4.11 Auto Configuration with Optimal Settings
This option lets you load the
Optimal
default settings. These
settings are
best-case values
which will provide the best
performance. Whenever your CMOS RAM is damaged, this
Optimal settings will be loaded automatically.
