42
Appendix C. ATX Power
The following note and picture show how to connect ATX Power Supply
to the backplane and ROCKY-P248SV SBC.
Please, disconnect the AC cord of the Power Supply from the AC source
when you plug-in DC connector to prevent sudden electric surge to the
board.
ROCKY-P248SV (through Power Button & +5VSB):
Connect the ATX power supply switch to the pin 17 (power
button) and pin 19 (+5VSB) of CN12 (multi panel) on the board.
If you wish to turn off the power supply, please push the ATX
power switch button for about 4 sec. And to turn ON the system,
simply push the button once.