63
The ROCKY-3742EVFG provides two kind of Wake Up Function.
This page describes how to use Modem Wake-Up and LAN Wake-Up
function.
Wake-Up function is working while you use ATX power supply,
Wake-Up By Modem Ring On
:
You must set the option
Wake Up On LAN/Ring
of CMOS
SETUP to be enabled. The ATX power supply will be switched on
when there is a ring signal detected on pin “RI” of serial port.
Wake-Up On LAN (for Intel 82559 LAN-chip)
:
You must set the option
Wake Up On LAN/Ring
of CMOS
SETUP to be enabled. When your computer is in power-down status,
you can see LAN Link/Active LED is flashing. This status indicates
that the LAN chip has entered standby mode and waits for Wake-Up
signal. You can use other computers to wake up your computer by
sending ID to it.
ID: ID is the address of your system LAN. Every LAN chip has a
factory-
set ID which you can find it from network information in
WINDOWS.
ID’s format is xx-xx-xx-xx-xx-xx
Example ID
: 00905C21D4
