51
Auto Detect DIMM/PCI Clk [ Enabled]
CPU Clock/Spread Spectrum [Default]
Item Help
-------------------------
Menu Level
↑↓←→
Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
Auto Detect DIMM/PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The choice: Enabled, Disabled.
CPU Clock/Spread Spectrum
This item allows you to select the CPU Clk/spread spectrum modulate.
The choice: 124MHz/On, 133MHz/Off, 133MHz/On, 138MHz/Off,
140MHz/On, 150MHz/On.
4.13 Defaults Menu
52
Selecting “Defaults” from the main menu shows you two
options which are described below
Load Fail-Safe Defaults
When you press <Enter> on this item you get a confirmation
dialog box with a message similar to:
Load Fail-Safe Defaults (Y/N) ? N
Pressing ‘Y’ loads the BIOS default values for the most stable,
minimal-performance system operations.
Load Optimized Defaults
When you press <Enter> on this item you get a confirmation
dialog box with a message similar to:
Load Optimized Defaults (Y/N) ? N
Pressing ‘Y’ loads the default values that are factory settings
for optimal performance system operations.
4.14 Supervisor/User Password Setting
You can set either supervisor or user password, or both of then. The
differences between are: