ROCKY-3705EV-R2 Socket 370 Celeron
TM
, Pentium III
®
& Tualatin Processor with Ethernet , VGA , Audio Board
3
4.16 Exit
Selection
…………….. ........................................................... 62
Appendix A. WatchDog Timer .......................................... 63
Appendix B. POST Messages........................................... 65
Appendix C.
DMA , IRQ , 1st MB Memory and I/O Address Map.... 71
Appendix D. How to Upgrade a New BIOS ..................... 73
Appendix E. ATX Power Supply ...................................... 76
ROCKY-3705EV-R2 Socket 370 Celeron
TM
, Pentium III
®
& Tualatin Processor with Ethernet , VGA , Audio Board
4
1
Introduction
Welcome to the
ROCKY-3705EV-R2
Socket 370 Celeron
®
,
Pentium III
®
(FC-PGA) and Tualatin Processor with
10/100Mbps Ethernet , VGA , Audio Board. It is equipped with
high performance Intel
®
Celeron up to 700MHz( or above ) ,
Pentium III ( FC-PGA ) 500M-1GHz ( or above ) and Tualatin
1.26 GHz ( or above ) Processor and advanced high
performance multi-mode I/O, designed for the system
manufacturers, integrators, or VARs that want to provide all the
performance, reliability, and quality at a reasonable price.
This board has a built-in IDE Interface CompactFlash™ Disk
( Type II ) for embedded application. The CompactFlash™ Disk
is 100% compatible to hard disk. User can use any DOS
command without any extra software utility. The Flash Disk
currently is available from 128MB to 1GB.
One advanced high performance LPC super I/O chip – ITE
( IT8705F ) is used in the
ROCKY-3705EV-R2
board. The on-chip
UARTs are compatible with the NS16C550. The parallel port and
FDD interface are compatible with IBM PC/AT architecture.
ROCKY-3705EV-R2
uses the advanced SIS SIS630ET Chipset
which is 100% PCI compatible chipset with PCI 2.1 standard. In
addition, this board provides two 168-pin sockets for its on-board
DRAM. The DIMM module is 3.3V SDRAM and max. 512MB for
each module.
The VGA chip ( on chip sis300) used on
ROCKY-3705EV-R2
supports 3D function .
