ROCKY-3705EV-R2 Socket 370 Celeron
TM
, Pentium III
®
& Tualatin Processor with Ethernet , VGA , Audio Board
31
Note that a brief description of each highlighted selection appears at the
bottom of the screen.
The main menu includes the following main setup categories. Recall that
some systems may not include all entries.
Standard CMOS Features
Use this menu for basic system configuration. See Section 4.6 for the
details.
Advanced BIOS Features
Use this menu to set the Advanced Features available on your system.
See Section 4.7 for the details.
Advanced Chipset Features
Use this menu to change the values in the chipset registers and optimize
your system's performance. See section 4.8 for the details.
Integrated Peripherals
Use this menu to specify your settings for integrated peripherals. See
section 4.9 for the details.
Power Management Setup
Use this menu to specify your settings for power management. See
section 4.10 for the details.
PnP / PCI Configuration
This entry appears if your system supports PnP / PCI. See section 4.11
for the details.
PC Health Status
Use this menu to monitor your hardware. See section 4.12 for the details.
ROCKY-3705EV-R2 Socket 370 Celeron
TM
, Pentium III
®
& Tualatin Processor with Ethernet , VGA , Audio Board
32
Frequency/Voltage Control
Use this menu to specify your settings for frequency/voltage control. See
section 4.13 for the details.
Load Fail-Safe Defaults
Use this menu to load the BIOS default values for the minimal/stable
performance for your system to operate. See section 4.14 for the details.
Load Optimized Defaults
Use this menu to load the BIOS default values that are factory settings
for optimal performance system operations. While Award has designed
the custom BIOS to maximize performance, the factory has the right to
change these defaults to meet their needs. See section 4.14 for the
details.
Supervisor / User Password
Use this menu to set User and Supervisor Passwords. See section 4.15
for the details.
Save & Exit Setup
Save CMOS value changes to CMOS and exit setup. See section 4.16
for the details.
Exit Without Save
Abandon all CMOS value changes and exit setup. See section 4.16 for
the details.
