ICP DAS USA I-7540D Скачать руководство пользователя страница 100

Страница: 100 / 122

I-7540D CAN-Ethernet Gateway User’s Manual (Version 1.8, March/2021)

100

Step 6:

Select one of the I-7540D modules, and then click the

Server Options

button to configure the server options.

Step 7: Enter the new configuration settings. The new settings will replace any

text already in the Server Options window text boxes. Click the

button to save the new settings.

Notes:



Keep Alive Time (ms) field

After connecting

to the μPAC-7186E, the VxComm Driver will automatically

and periodically send commands to keep the I-7540D alive. The timer will be

reset after each send/receive command/data success. The Keep-Alive

mechanism will not work until the next timeout. The default setting of

Keep-Alive time is about 7000 ms. Its recommended setting is (I-7540D’s

System Timeout * 1 / 3) or smaller value.



Connection-Broken (ms) field

The VxComm Driver will try to re-connect if the connection is broken. When

the client is sending a message to the

μPAC-7186E, the Internet (TCP/IP)

Содержание I-7540D



























































































































Результаты поиска

Содержание I-7540D

Отзывы:

ICP DAS USA I-7540D, Руководство пользователя, Страница: 100 / 122

Результаты поиска

Содержание I-7540D

Отзывы: