P4
2
Set Parameters of I-7530
2.1 As the following figure, set the Init / Normal switch on the back
of the I-7530 to the “Init” position. Then, turn on the power. The
ON LED of the I-7530 will be flash once per second. That means
that the I-7530 is in the configuration mode.
2.2 Connect the available COM port of the PC to the I-7530, and
execute the VxCAN Utility. VxCAN Utility can be downloaded
from the following link :
https://www.icpdas.com/en/product/guide+SUtility_Dri
ver+VxCAN__Utility
2.3 Click the search button and the search window will be popped
up. Select the COM Port connected to the I-7530, then click the
"Search CAN Products" button.
