ECAT-2011H EtherCAT Slave I/O module
Copyright © 2019 ICP DAS CO., Ltd. All Rights Reserved.
-
6 -
2.
Hardware Information
2.1
Appearance
The front panel and top panel of the ECAT module contain the I/O connector, LEDs, Ethernet Port
and power connector.
Top Panel
1.
DC Power Input Connector
The
“+Vs”
and
“GND”
pins are used for the power supply applies to all types of ECAT module. The
valid power voltage range is from
+10 to +30 V
DC
.
The definition of
“F.G.”
(Frame Ground)
: Electronic circuits are constantly vulnerable to
Electrostatic Discharge (ESD), which becomes worse in a continental climate area. ECAT module
feature a new design for the frame ground, which provides a path that bypasses ESD, resulting in
an enhanced ESD protection capability and ensuring that the module is more reliable.
2.
EtherCAT Interface
ECAT modules are equipped with two RJ-45 EtherCAT Interface ports.
IN
is EtherCAT signal input
port that connect EtherCAT Master or EtherCAT signal output of previous EtherCAT slave module
，
OUT
is EtherCAT signal output that connect the next EtherCAT signal input of EtherCAT slave
module.
1. DC Power Input
Connector
2. EtherCAT Interface
