EC2-DIO series EtherCAT Slave I/O module
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
-
39 -
Step 3
Confirm current identification ADO (Address Offset) is “
(ADO 0x0134)
”.
Don’t forget to assign the value in decimal. The value “
100
” is just an example here.
Step 4
User should also setup the same value on moduel like following:
The digit format “Rotary Switch” is hex so that we should set it to “
0x64
”.
Step 5
Please disconnect the power connect to
reboot
the module