EC2-DIO series EtherCAT Slave I/O module
Copyright © 2023 ICP DAS CO., Ltd. All Rights Reserved.
-
36 -
Step 4
Check out the progress bar and wait for it finish.
Step 5
TwinCAT master will notice user the function successes, just click “OK”.
NOTE: Due to the ECx-DIO will restart the system after firmware upgrading so that
TwinCAT will indicate the slave not in the expected state. Don’t worry, this is a normal
situation. TwinCAT will try to switch the slave to original state (ex: OP or BOOTSTRAP).