background image

Owner’s Manual Compact Range

 

 

iCoolsport.com

Page 3

aDviCe aBOUT OBTaininG The CORReCT FLOW OF WaTeR

OCCasiOnaLLY YOU MaY eXPeRienCe sOMe DiFFiCULTY GeTTinG The WaTeR TO FLOW CORReCTLY 

ThROUGh YOUR iCOOL DUe TO TRaPPeD aiR in The sYsTeM OR The hOses.

 

PLease ReaD These siMPLe insTRUCTiOns TO LeaRn hOW TO CORReCT This.

The PUMP. 

Water flow through your iCool is produced by a high quality long life circulating pump that, for the 

complete safety of the user, operates on a very safe low voltage and outside of the iCool’s cooling machinery.
Circulating  type  pumps  can  lift  and  move  water  reliably  for  many  thousands  of  hours,  however,  just  like 

swimming pool and spa pumps, they do not provide suction and are therefore not self priming. self priming 

diaphram type pumps are not as reliable over long periods and so are not suitable for this type of operation. 

The pump with your iCool can not begin to operate correctly unless it is fed with a head of water from a pool 

where the level  is above the pump and any air tapped in the feeding hoses is removed.

 The water in the pool 

must be above the pump before you start it. There must be no air trapped in the supply hose from the pool to 

the pump and no part of the hose from the pool to the pump can be above the level of the water because this 

will trap air that can prevent water from flowing to the pump.  
There are several easy ways to clear trapped air.  For example, by touching the PUMP On OFF button 3 or 4 

times so the pump is off for about 5 to 10 seconds each time. The surge when the pump starts can often clear 

the trapped air but it may take a few times if there is a lot of trapped air.
if you still do not have a good flow of water, with the pump running, undo the levers on the snap hose fitting that 

connects the hose from the pump to the bottom inlet on the iCool. There is no need to remove the fitting, just 

open the levers and this will allow any trapped air to escape. as soon as you see water coming out of fitting, 

quickly snap it back into position and lock it again.

YOU OnLY neeD TO BLeeD The sYsTeM OnCe FOR eaCh seT UP. Once primed of air, the system will remain 

primed and water will normally flow instantly each time you start the pump until the pool is emptied or the iCool 

is moved.

neveR OPeRaTe The PUMP WiThOUT WaTeR.

 Water pumps can not operate for long periods without water 

because the water provides the lubrication to the bearings. To prevent damage, your iCool system will shut 

down the pump automatically if water is not flowing properly for more than 2 minutes.  if this happens a warning 

screen will normally appear to explain to you how to correct the problem. 

POOL seTUP aDviCe

Before  you turn on your iCool system you must set up and fill the pool.  iCool portable inflatable pools and 

semi permanent demountable pools come with their own instructions and are easy to set up. 

Just be sure 

that they are in the position you require before you fill them with water 

as the weight of the water will make it 

impossible to move them once they are filled.

VERY IMPORTANT INFORMATION ABOUT CHLORINE, SALT AND BROMIDE 

All iCool Compact models are fitted with the latest chemical and salt resistant Titanium Heat Exchanger tanks, 

however we highly recommend that chlorine should only be used in very small doses to prevent skin and eye 

irritation to pool users and to extend the life of metal parts such as the circulating pump in your iCool. 
In cold water, Chlorine is very effective in small doses of just 1.5 parts per million, (1.5 ml per litre). 
For example an iCool inflatable pool needs only half a teacup full of chlorine per daily session and only if the 

water is to be used again. If the water is to be discarded after one session chlorine is not needed at all.
The use of salt serves no practical purpose in ice bath therapy and should be avoided as salt is very corrosive. 

Never use bromide or bromine based products

they are extremely corrosive and can damage the metal parts. 

Household first aid disinfectants such as Dettol or similar can be used instead of chlorine, they are very effective 

for bacterial control and will not harm your iCools components.  2 to 4 capfuls per day is usually enough.
iCool also produces a very effective anti bacterial solution especially formulated use with for ice bath pools and 

equipment. Please see our web site for details.

Содержание iCool Compact Series

















Отзывы: