TeMPeRaTURe LiMiTaTiOns
Because of the dangers of hypothermia in the case of an unattended athlete using the pool, your
system will not allow you to set temperatures below 5°C/40°F. if the model you are using is the
contrast model which also provides heating for contrast therapy you cannot set the temperature
above 45°C/112°F because of the risk of scalding. These temperature limits have been set after
wide consultation with the sporting industry around the world. There are no demonstrated benefits
in using water temperature lower than 5°C or above 45°C and therefore the risk of doing so is not
justified. if you really do need lower or higher temperatures for any reason, iCool can change the
software on request, but this modification is at the owner’s risk.
TeMPeRaTURe seTTinGs
When your iCool starts up, you are offered 3
different ways to choose a water temperature
setting. Whichever method you choose it
eventually takes you to the main run screen. if you
make no setting, the system will automatically
insert 15°C.(around 59ºF) in this case you can
proceed directly to start the pump and cooling
system.
if you want to use your previous setting from the
last session, you can touch the
Use PReviOUs
seTTinG
button and the last setting you used
will be automatically inserted into the system.
Previous settings will be lost if you have removed
to mains power.
if you want to make a different temperature setting,
you touch the
ChanGe seTTinG BUTTOn
and
this will take you to the
WaTeR TeMPeRaTURe seTTinG sCReen
illustrated above right, where you can use the up and down
arrows to select the temperature you require. after you make
your setting touch the start button to go to the main screen
where you can start both the pump and the cooling system and
where all relevant temperature information is clearly displayed.
after you start the system running you can view the actual
water temperature in full screen by touching the blue
POOL
TeMPeRaTURe
square at the bottom left of the main screen for
more than 2 seconds
WaTeR TeMPeRaTURe seTTinG sCReen
WaTeR TeMPeRaTURe FULL sCReen
10
27
14
27
10
TiMinG FUnCTiOns
Your iCool offers a number of very useful timing functions
including a real-time clock, a countdown timer to time recovery
and training sessions and a timer to shut down the system
automatically at a predetermined time after use. To set up and
use these functions touch the TiMeR FUnCTiOn button on the
home screen. You can reach this screen by using the BaCK 1
button or the hOMe button.
You can display the time of day on the built-in clock.
To set the clock touch the
seT Main CLOCK
button on the
timing functions screen and the time setting display on the
bottom right of the screen will begin flashing. You must set it
while one of the numbers is flashing by using the up down and left right keys. Once you stop using these keys
for more than a few seconds the display will stop flashing and the time showing is set into the system and the
clock begins operating.
The iCool clock operates in the universal 24-hour time style.
11:25
TiMe seTTinG sCReen
