The water level in the pool must be above the water inlet to the pump and the inlet on the Compact unit.
iCool must be on the same level surface as the pool. it must not be above the pool.
QUiCK sTaRT GUiDe
The following is a quick start guide to get your iCool up and running quickly, however you should read the
entire manual to get the most out of your iCool.
sTeP 1
Before you fill the pool you must connect the 2 hoses provided. iCool hoses have convenient snap fittings that
are very quick and easy to use. Your 2014 model features an new type of pump that is very small and relaible.
it has on board “intelligence” it will surge automatically for a few seconds when first switched on help clear
trapped air. after about 30 seconds if air is still trapped it will switch off for about 15 seconds to allow the
water to fill the hoses and then start again. You can also do this manually using the Pump start button to help
establish a good clear flow of water.
This hOse CaRRies ChiLLeD WaTeR
BaCK TO The TOP OF The POOL
THE
WaTeR
PUMP
PUMP
POWeR
PLUG
The PUMP ReTURns WaTeR
FROM The BOTTOM OF The
POOL TO The iCOOL
