ICON ProAudio Platform Nano Air, Руководство пользователя

Страница: 74 / 115

74
Send Destination, Send Level, Pre/Post, Bypass
In an analog/digital hybrid setup making use of I/O Utility on busses, manage signals to outboard
gear without touching manual routing. Once prepared, turn a knob on the control surface to
send a track through your outboard gear. The template tracks using hardware would be set to no
output, only reaching output through bus sends.This requires rendering the final mix through the
hardware: Logic Pro X -> Bounce -> Mode:select“Realtime”
Example: Tracks have no output and have sends ready with Bus 10 – 12 assigned.
Bus 10 = Dry output to digital sum
Bus 11 = I/O plugin (with latency offset) to hardware 1, DAW output 1-2
Bus 12 = I/O plugin (with latency offset) to hardware 2, DAW output 1-2
Destination/Level Mixer Mode: ( Send + F7 )
Use this mode to mix send amount and select busses for multiple tracks. With prepared effect
busses,this is the place to create an entire effects mix for mixdown.
The Encoder Knobs select a send destination, and the faders adjust the send amount. Mute toggles
send bypass, and Solo toggles pre/post. Cursor Arrows up/down select the send slot.
Destination/Level Focus Mode: ( Send + F8 )
Use this mode to mix the bus effects balance for single complex tracks. This is the optimal tool for
making a deep effects mix on prominent tracks such as main vocals and lead sounds. With this
mode plus automation, you can use the faders to paint with an artistic pallet of 8 effects to create
color, size, dynamics, and complexity. Edit send destination and send level for 8 send slots on the
selected channel strip. The Encoder Knobs select a send destination, and the faders adjust the
send amount. Each channel Mute toggles send bypass. Press channel Solo to toggle pre/post.
<<<<<
Plug-In
>>>>>
Plug-In Assignment Mode:
( Plug - In )
Press Plug-In to open and edit plug-ins on any track. To quickly edit an existing plug-in, press the
Encoder Knob to the corresponding plug-in namevisible on the LCD display. Plug-In parameters
appear on the LCD display and are assigned across the Encoder Knobs . Press Cursor Arrows left/
right to view and edit further pages of parameters. Press Plug-In to exit. Press Shift + Mute to
bypass the plug-in. Turn an Encoder Knob to select a plug-in and press to confirm and edit. The
up/down Cursor Arrows change the selected slot number.
Plug-InFocusMode:
( Plug-In - Plug-In )
Press Plug-In again to view and edit plug-ins in the first 8 slots of the selected track. Press
Shift + Mute to bypass a plug-in. Turn and press an Encoder Knob to select a plug-in for the
corresponding slot number. Adjust parameters with the knobs and use the left/right Cursor Arrows
to view and edit further pages of parameters.