ICON ProAudio Platform Nano Air, Руководство пользователя

Страница: 10 / 115

10
7. Assignment section
( Note: Functionality of these buttons varies from DAW to DAW. Please apply the
correct overlay for your current Digital Audio Workstation for proper function. The
functionality below applies to Apple Logic Pro.)
TRACK button -— Activate the track parameters of the software
PAN/SURROUND/EQ/Send/Plug-in/Instrument buttons -— These buttons are
used to activate the corresponding effect function of the DAW. They are typically
used in conjunction with the rotary encoder knobs. Press the button, its light will
turn on, and then rotate the rotary encoder knob to adjust the value.
8. LED color-coded function buttons
This section of 8-control buttons are LED color-coded for different functions
on each layer. Switch between the layers using the 5-round buttons located
above. They include red, green, blue, purple and yellow. Press any one of the
round buttons to switch between the function layers. Please place the correct
PVC overlay which corresponds to your current DAW to show the function for
each button on each color layer. Please refer to your DAW manual for more
information about the terms and functions listed.
9. Battery level indicator
1st Green -— Battery level between 76%-100%
2nd Green -— Battery level between 51-75%
Orange -— Battery level between 26-50%
Red -— Battery level less than 25%
Tip: While using the device, the red LED will start to flash if the battery level falls
below 5%. Please recharge it immediately.