background image

17

HOW TO PLUG IN THE POWER ADAPTER

IMPORTANT: If the elliptical has been exposed to 

cold temperatures, allow it to warm to room tem-

perature before you plug in the power adapter. If 

you do not do this, you may damage the console 

displays or other electronic components.

Plug the power adapter 

into the receptacle on 

the front of the ellipti-

cal. Then, plug the 

power adapter into an 

appropriate outlet that 

is properly installed 

in accordance with 

all local codes and 

ordinances.

HOW TO MOVE THE ELLIPTICAL

Due to the size and weight of the elliptical, moving 

it requires two persons. Stand in front of the elliptical, 

hold the upright, and place one foot against one of the 

wheels. Pull on the upright and have a second person 

lift the handle until the elliptical will roll on the wheels. 

Carefully move the elliptical to the desired location, and 

then lower it to the floor.

HOW TO LEVEL THE ELLIPTICAL

If the elliptical rocks slightly on your floor during use, 

turn one or both of the leveling feet beneath the rear of 

the frame or turn the leveling foot under the center of 

the frame until the rocking motion is eliminated.

HOW TO USE THE TABLET HOLDER

IMPORTANT: The tablet holder is designed for use 

with most full-size tablets. Do not place any other 

electronic device or object in the tablet holder.

To insert a tablet into 

the tablet holder, set 

the bottom edge of 

the tablet in the tray. 

Then, pull the clip over 

the top edge of the 

tablet. Make sure that 

the tablet is firmly 

secured in the tablet 

holder. Rotate the tab-

let holder to the desired 

angle. Reverse these 

actions to remove the 

tablet from the tablet holder.

Power Adapter

Pull on the 

upright

Lift here

Place 

your foot 

here

Leveling 

Feet

Leveling 

Foot

HOW TO USE THE ELLIPTICAL

Содержание PFEL55916.0





































Отзывы: