background image

21

   Press the Home button to exit the workout and 

return to the main menu. If necessary, press the 

Home button again.

   Press the End/Summary button to end the work-

out and view a workout summary. The workout 

summary will appear in the displays for several 

seconds.

   Change the volume level of 

the console by pressing the 

volume increase and decrease 

buttons.

5.   Measure your heart rate if desired. 

   You can measure your heart rate using either the 

handgrip heart rate monitor or an optional chest 

heart rate monitor (see page 24 for infor-

mation about the optional chest heart rate 

monitor)

.

 Note: The console is compatible with 

BLUETOOTH

®

 Smart heart rate monitors.

   Note: If you use both heart rate monitors at the 

same time, the chest heart rate monitor will 

have priority.

  

If there are 

sheets of plas-

tic on the metal 

contacts on the 

handgrip heart 

rate monitor, 

remove the plas-

tic. To measure 

your heart rate, 

hold the handgrip 

heart rate monitor 

with your palms resting against the contacts. Avoid 

moving your hands or gripping the contacts 

tightly.

   When your pulse is detected, your heart rate will 

appear in the display. For the most accurate 

heart rate reading, hold the contacts for at least 

15 seconds.

6.   When you are finished exercising, the console 

will turn off automatically.

   If the pedals do not move for several seconds, a 

tone will sound, the console will pause, and the 

time will flash in the display. To resume your work-

out, simply resume pedaling. 

   If the pedals do not move for several minutes and 

the buttons are not pressed, the console will turn 

off and the display will be reset.

Contacts

Содержание PFEL55916.0





































Отзывы: