11
6
6. With the help of a second person, move the
fitness mirror to the location where it will be
used.
Secure the fitness mirror to a wall stud with the
included Tether (19) as described below.
Attach the Tether (19) to the back of the Cabinet
(1) with two M6 x 10mm Screws (34).
Next, attach the bracket on the other end of the
Tether (19) to a wall stud with two M5 x 50mm
Lag Screws (35). Then, tighten the Tether to the
appropriate length.
8. After the fitness mirror is assembled, inspect it to make sure that it is assembled correctly. Make sure
that all parts are properly tightened before you use the fitness mirror. Extra parts may be included. Place
a mat beneath the fitness mirror to protect the floor. Remove the protective film from the mirror.
To register your product and activate your warranty today, go to my.nordictrack.com.
7. IMPORTANT: Always plug the Power
Adapter (23) into the fitness mirror before
you plug it into an outlet.
Plug the Power Adapter (23) into the receptacle
on the back of the Cabinet (1).
To plug the Power Adapter (23) into an outlet,
see HOW TO PLUG IN THE POWER ADAPTER
on page 12.
To install Shelves and/or Racks (not shown) in
the Cabinet (1), see HOW TO ADJUST THE
SHELVES AND RACKS on page 12.
19
1
1
34
35
23
7
Содержание NordicTrack Vault
Страница 4: ...4 STANDARD SERVICE PLANS...
